Aluminum extruder is mainly used to produce copper and copper alloy pipe, bar, profile and wire extruder. According to its transmission mode can be divided into mechanical transmission mode and hydraulic transmission mode. Mechanical drive extruders are easy to be impacted when the load changes.
We usually put the aluminium profile extrusion machine is divided into three parts: the master cylinder and the plate (extrusion barrels), extrusion rod, its master cylinder is a hydraulic device, hydraulic oil pressure to the small piston, through large piston travels forward extrusion rod, will be after heating of aluminum rod extrusion barrels, after reaching the exhaust pressure extrusion barrels back exhaust, go forward with the mold cavity, after reaching the material pressure, extrusion rod and forward to the aluminum extrusion barrels into mould tap hole, aluminum alloy by die slowly out of shape.
Copper profile extruder in use, its hydraulic oil as the main working medium, in the daily maintenance, especially should pay attention to, not because the oil level is too low, casually into the tank does not meet the requirements of oil. The oil quality should be inspected regularly (generally 3~6 months is appropriate), and the unqualified oil should be replaced.
Aluminum extruder operators before the formal operation must pay attention to the following matters, to ensure the normal production of aluminum, safety and continuity.
The price of aluminum extruder is different with different models. Its use includes a series of links, such as installation, adjustment, commissioning, operation, maintenance and repair. Although it seems tedious, in fact, it only needs to follow the instructions on the operation. But as the operator must be familiar with the structure characteristics of the aluminum extruder he operates to correctly grasp the extrusion process conditions and operate the machine correctly. There are many kinds of extruders, although the operation points are different, but there are also some similarities.
Metal extruder is the most important equipment to realize metal extrusion processing. Metal extrusion is an important method of metal plastic pressure forming. Its important characteristic is that the ingots can be processed into tubes, bars and profiles in a short time, and almost no other methods can be compared with it.
Aluminum extruder is mainly used to produce copper and copper alloy pipe, bar, profile and wire extruder. According to its transmission mode can be divided into mechanical transmission mode and hydraulic transmission mode. Mechanical drive extruders are vulnerable to impact when the load changes. They are not sensitive to adjustment of extrusion speed. Its overload protection capacity is small, difficult to large-scale application.