Advantages
Whole machine horizontally installed in compact structure with four columns and oil box to be easy for installation and reparation.
Four-point positioning is adopted for perforated moving beams and moving beams with an adjustable core.
Two kinds of technology are applied: following pin and fixed pin to satisfy extruding demand for various calibers.
Mass-flow plug valves are applied in the hydraulic system for stable performance, mass flow and low upgoing of temperature.
PLC is applied so is Human Machine Interface for real time monitoring of extruding processing parameter.
Technology
-
Prestressed Closed-in FrameworkThe overall closed-in structure is prestressed by special hydraulic tool to improve the rigidity of framework in the extruders.
-
Rectilinear Feeding TrolleyFeeding Trolleys are powered by servo electrical motors to go forward and backward to horizontally move aluminum bars from feeding position to extruding position.
-
Servo Energy-saving Hydraulic SystemOil pump is no longer driven by common motor but by servo one which is fast in response, stable in rotation speed and easy for start-stop. All these can improve the production capacity of extruders for aluminum structural section while reduce their energy cost by 20%-30%..
Service
Selected References
Furthermore, cases from clients all over the world prove that it is our professionality that wins great prestige throughout the industry.
| texture of material: | copper alloy |
| Rated extrusion pressure: | 2000T |
| Maximum billet length: | 900mm |
| Min max extrusion speed: | 0.5-50mm/s |
| texture of material: | copper alloy |
| Rated extrusion pressure: | 1630T |
| Maximum billet length: | 800mm |
| Min max extrusion speed: | 0.2-18mm/s |
| texture of material: | aluminium alloy |
| Rated extrusion pressure: | 1500T |
| Maximum billet length: | 900mm |
| Min max extrusion speed: | 0.2-18mm/s |
| texture of material: | aluminium alloy |
| Rated extrusion pressure: | 1800T |
| Maximum billet length: | 1000mm |
| Min max extrusion speed: | 0.2-20mm/s |
| texture of material: | aluminium alloy |
| Rated extrusion pressure: | 800T |
| Maximum billet length: | 550 mm |
| Min max extrusion speed: | 0.2 - 12 mm/s |
| texture of material: | aluminium alloy |
| Rated extrusion pressure: | 1250T |
| Maximum billet length: | 700mm |
| Min max extrusion speed: | 0.2-18mm/s |
